This VW T5/T6 C-Channel Awning Rail for Roof Bars has a powder-coated gloss black finish and is pre-drilled to fit the existing roof mounting points on a VW T5 or T6.
The C-profile will allow you to connect a drive-away awning or sun canopy type awning to a VW Transporter with roof bars. This pre-drilled C-rail is available for SWB or LWB VW Transporters with the choice of N/S Left-Side for standard vans or O/S Right-Side for vans with a sliding door on the right.
To Fit: Use the existing fixing points to sandwich the rail in the vehicle roof gully under roof bar brackets and secure in between with the roof bar bolts.
If you're in any doubt as to whether this rail will fit your van, we recommend ordering a C-Channel Awning Rail Sample - We do not offer a sample in Black.
A sun canopy type awning will just slide directly into the C profile. Use a 6mm to 6mm Drive-Away Kit with a drive-away awning to make it easier to detach and reconnect if you drive out for the day
- Extended profile design for use with roof bars
- Powder coated gloss black
- 100% secure awning attachment
- Can be used to connect a sun canopy or a drive-away awning
- Available in 2.4m and 2.8m lengths for SWB and LWB vans
- For use with a standard 6mm core (7mm) Kador strip connection
- Made in the UK
- Packaged in UK made recycled fibre postal tubes that are 100% recyclable
Material: 1.5mm Aluminium
Profile Dimensions: 55mm (40mm base) x 24mm
Length: SWB 2.4m or LWB 2.8m
Finish: Powder Coated Gloss Black
*Unfortunately, due to the length of this rail, it cannot be delivered outside the UK or to Offshore Isles, Highlands and Northern Ireland addresses.
Please see below our guide on how to fit this Roof Bar Awning Rail with a set of our own VW T5/T6 Roof Bars (fitting of other models/brands of Roof Bars may vary).