Free Next Working Day Delivery on Orders Over £75*

VW Awning Rails & Drive-Away Connection Kits

VW T5 & T6 Transporter C-Channel Awning Rail

VW T5 & T6 Transporter C-Channel Awning Rail
VW T5 & T6 Transporter C-Channel Awning Rail
VW T5 & T6 Transporter C-Channel Awning Rail
VW T5 & T6 Transporter C-Channel Awning Rail
VW T5 & T6 Transporter C-Channel Awning Rail

VW T5 & T6 Transporter C-Channel Awning Rail

£39.99 RRP: £40.00
Stock Status: In Stock
A low-profile, anodised aluminium rail for connecting drive-away awnings & sun canopies to a VW T5 Transporter
Bookmark and Share

This VW T5 and T6 Transporter C Channel Awning Rail is an easy and secure way of connecting drive-away awnings and sun canopy type awnings to Volkswagen T5 or T6 Transporters. This high quality low profile rail requires no drilling into your van to attach and will not change the look of your van as it is concealed in the roof gully.
Our C Channel Awning Rail takes just 10 or 15mins to drill and fit using the existing roof bolt holes, once fitted takes just 2mins to take off and put back on.  The rail is secured with stainless steel pan headed Allen bolts (supplied) which simply screw into the existing roof fixings.
This rail can also be fitted to VW T5 and T6 campervans with elevating roofs by bonding it on the roof just in front of the scissor hinge/gas strut so it is concealed under the pop-top when closed.  
See our blog page for more information about; How to fit a C-Channel C-Profile Awning Rail to a VW T4, T5 or T6

Standard 6mm core Kador strip beading slides smoothly into the anodised rail providing a completely secure connection for sun canopies and drive-away awnings. Sun canopy type awnings just slide directly into the C profile and drive-away awnings can be connected directly or via a Drive-Away Kit
Fitting Instructions 
1. Remove the existing roof blanking bolts, stick some masking tape to the inner edge of the roof gulley (closest to the centre of the roof) and mark the hole centre positions on the tape.
2. Position the C-Channel on the roof approximately 3cm from rear doors and carefully mark the bolt hole centres from the masking tape across to the rail.
3. Mark the hole centres at an equal distance from the rail edge and drill 8mm holes.
4. Secure the C-Channel using the supplied bolts and washers - 4 x on a SWB and 5 x on LWB.

  • Easy to drill and fit in 10 or 15 minutes
  • Low profile concealed design
  • Supplied with stainless steel button head bolts and washers
  • 100% secure awning attachment
  • For use with standard 6mm core Kador strip
  • Can be used to connect most awnings and sun canopies
Material: 2mm Anodised Aluminium
Profile Dimensions: W - 31mm x H - 16mm
Weight: 750g/950g

Rail Lengths
A 2.4m rail is the maximum length for a SWB T5 this will run from the roof gully tapered section at the front to 3cm from the rear doors. 
SWB: 2.4m length
LWB: 2.8m length
*Please note: Due to the length of this rail it is classed as an oversize package and has to be sent by a specialist courier (£8.99) - therefore we cannot deliver this item outside the UK and it doesn't qualify for free delivery over £75. 
  • Product Code:
  • MPN:
  • Type:
    Awning Rails
  • Brand:
    Funky Leisure
  • Condition:
  • Weight: