We can supply and deliver our VW T4/T5/T6 C-Channel Awning Rail to Europe in two sections. Due to courier length restrictions on UK/European delivery we are limited to a maximum size of 140cm.
As with full lengths, our Two Section C Channel Awning Rail takes just 10 or 15mins to drill and fit using the existing roof bolt holes. Once fitted, this low profile rail is hidden in the roof gully, if required, it can be removed/refitted in just 2mins. The rail is secured with stainless steel pan headed Allen (hex) bolts (supplied) which simply screw into the existing roof fixings. The rail can be glued into position on a VW T4 using Sikaflex or similar adhesive.
This rail can also be fitted to VW T4, T5 and T6 campervans with elevating roofs by bonding it onto the roof just in front of the scissor hinge/gas strut so it is concealed under the pop-top when closed. See our blog page for more information about; How to fit a C-Channel C-Profile Awning Rail to a VW T4, T5 or T6
If necessary, the join where the two awning rail sections meet can be bonded using suitable glue and a small strip of metal or plastic.
- High quality anodised aluminium rail
- For use with standard 6mm core (7.5mm overall) Kador strip
- Kador strip glides really smoothly through the anodised surface
- Low profile rail – will also fit under most elevating roofs
- 120cm and 140cm lengths supplied with hex bolts and washers
Material: 2mm Anodised Aluminium
Dimensions: 16mm x 31mm profile x 120cm/140cm lengths
The width of the flat fixing part of the rail is 15mm
Inner Channel Diameter: 9.5mm
2 x 120cm lengths - £22.99
2 x 140cm lengths - £26.99