The VW T4/Mercedes Vito C-Channel Awning Rail for Roof Bars fits neatly into the roof gully of short or long wheelbase vans. The C-profile rail can be either drilled and sandwiched under the roof bar brackets of a VW T4 or drilled to match the existing roof gully fixing holes of a Mercedes Vito and bolted in place either with or without roof bars.
This awning rail is universal and can be used on many other vehicle makes that have a roof gully at the edge.
To Fit: Cut the rail to the required length. Place masking tape next to the existing fixing positions in the roof gully and mark the centres on the masking tape. Lay the C-channel rail in position in the roof gully and mark the hole centres on the rail. Drill the rail, position and bolt down/refix the roof bar with the rail sandwiched under the roof bar fixing brackets.
If you're in any doubt as to whether this rail will fit your van, we recommend ordering a C-Channel Awning Rail Sample.
A sun canopy type awning will just slide directly into the C profile. Use a 6mm to 6mm Drive-Away Kit with a drive-away awning to make it easier to detach and reconnect if you drive out for the day.
- 100% secure awning attachment
- Can be used to connect a sun canopy or a drive-away awning
- Supplied in universal 3m lengths for SWB and LWB vans
- For use with a standard 6mm core (7mm) Kador strip connection
- Made in the UK
- Our rails are packaged in UK made recycled fibre postal tubes that are 100% recyclable
Material: 1.5mm Aluminium
Profile Dimensions: 52mm (32mm base) x 33mm
*Please note: due to their length, awning rails cannot be processed by our courier as quickly as standard parcels – they are too large for conveyer belts and require manual handling. Consequently, although a Next Day Delivery service will be prioritised, it is not a guaranteed to arrive Next Day.
**Unfortunately, due to the length of this rail, it cannot be delivered outside the UK and there is a surcharge for Offshore Isles, Highlands and Northern Ireland.