The Voltaic Systems V50 USB Battery Pack is a powerful, portable 12,800mAh battery that can charge smartphones, cameras, tablets and other USB devices. The V50 is optimised for solar charging with dual USB-A outputs on the top for charging two devices simultaneously as well as a USB-C power delivery input/output top port for fast charging.
The V50 features Voltaics ‘Always On’ mode via the two top USB-A outputs. This ensures that the V50 will not shut off even when a device is drawing low or no power mode making it ideal for IoT devices & timelapse projects.
The battery can be recharged via a solar panel or USB port with the included charging cable and also allows for pass through charging.
Features
- Powerful 12,800mAh Li-Ion battery
- Charge smartphones, tablets, GoPros and DSLR's
- Optimised for solar charging
- Pass through charging
- Recharge via solar panel or USB
- 2X USB-A Ports 1X USB-C PD
- Safe for air travel (Carry-on Luggage Only)
- Always On mode designed for IoT and Time-Lapse Projects
- Built-in temperature and charge protection
Specifications
Capacity: 12,800mAh, 47 Watt Hours
Battery Type: Li-Ion
Dimensions: 11.4cm x 7.8cm x 2.6cm
Weight: 272g
USB-A Output (2 Always On ports): 5V/2A, 3A max. Use side port for charging if using Always On mode.
USB-C Input Solar (Both USB-C ports): 5-6V/2A
USB-C PD Input / Output (Top USB-C port): 5V/4A, 9V/2.2A, 12V/1.6A
Minimum Charge Current: 5mA (indicators turn on at 60mA)
Maximum Power Point (MPP): 5.2V
Protection: Short circuit over charge, over discharge, over temperature (45℃ Input Cutoff, 60℃ Output Cutoff), under temperature (0℃ Input Cutoff, -15℃ Output Cutoff)
-
MPN:V50
-
Type:Batteries & Chargers
-
Battery:V50
-
Brand:Voltaic Systems
-
Product Code:V50KIT
-
Weight:0.4kg
Tablets: Charges all tablets that are powered by USB including Apple iPads and Samsung Tablets. Will not charge tablets that charge at 12 or 16 Volts such as a Microsoft Surface.
Digital Cameras: Charges both DSLRs and cameras that charge from USB. For DSLRs, an optional camera charger cradle that matches your camera battery is required.
Microcontrollers: Compatible with USB powered microcontrollers including Arduino, Raspberry Pi and more.