Vango TWIN Drive-Away Kit - 6mm to 6/4mm

The Vango Twin Drive-Away Kit makes connecting and driving away from your Awning simple with a dual 6mm & 4mm beading on the vehicle edge to fit almost all awning rails and windouts on the market.

This 3 metre kit contains 4 x 75cm figure of 8 sections and a full 3 metre length of Twin kador strip all which store in the included carry bag. The industry standard figure of 8 sections will connect to all major brands of Drive-Away awnings including Vango, Kampa, Outdoor Revolution and Outwell.

A drive-away kit enables one person to detach/reconnect a van from/to a drive-away awning in just a couple of minutes.

How To Connect to your Campervan

1. Slide your kador strip into your awning rail or windout awning channel.
2. Slide the Figure of 8 sections onto the drive-away awning beading on the tunnel and the other side onto the kador strip.

How To Detach from your Campervan

1. Loosen off front webbing straps/guylines of the awning to reduce tension.
2. Slide out the kador strip and figure of 8 to disconnect for the vehicle.
3. Peg any straps/guylines on the awning to maintain stability.
4. Roll away and secure the awning tunnel for neat finish.

Top Connection Tips

1. Once you are confident setting up you can cut the kador strip and 1 x figure of 8 down to the optimal size for your awning connection tunnel.
2. Use a Debus Awning Rail Stopper to prevent the kador strip moving around in the rail when attaching.
3. Use a Debus Campervan Drive-Away Parking Marker so you know exactly where to re-position you van when reconnecting.

Features

• 3 metre kit with figure of 8 and kador strip
• Fits C-channel awning rails, Reimo Multi-rail and wind-out awnings.
• Compatible with Vango, Kampa, Outdoor Revolution & Outwell Awnings
• Supplied in zipped storage bag

Specifications
Pack Size: 79cm x 5cm x 5cm

Weight: 950g